Hot Sale End Beam/End Carriage Single Girder Crane End Beam

END-CARRIAGES FOR BRIDGE CRANES

b'DONATI end-carriages are designed for handling operations on bridge crane rails: at single running speed from 3.2 to 25 m/min; at two running speeds, from 12.5/3.2 to 80/20 m/min; Operating on: single girder, with a capacity of up to 20,000 kg and gauge of up'

Overhead Crane Beam - Overhead Crane Girder, Overhead ...

b'Jul 21, 2019 \xc2\xb7 Overhead crane beam, also known as overhead crane girder, is the important component of single girder or double girder overhead crane which is mainly consists of main beam, auxiliary beam, end beam and railings. The overhead crane beam has a certain arch angle, and the auxiliary beam is located at the upper end of the main beam, which is used to strengthen the stiffness of the main beam \xe2\x80\xa6'

Underslung Crane - Single Girder | LOADMATE

b'LOADMATE CRANE FEATURES. The crane headroom can be further reduced by inserting the main girder between the end carriages. Underslung Overhead cranes are typically available in standard capacities up to 10 tons (higher capacity up to 25 tons and span up to 90 ft \xe2\x80\xa6'

China Crane End Carriage Factory - Modern Heavy Industry

b"Electric Crane End Carriages main feature: 1. Suitable to kinds of single girder and double girder overhead crane. 2. The end beam to be connected with main girder by welding or strength bolts. There will be bolt hole for the clients's demands. 3. Our end truck adopt different size wheel from 150-500mm diameters according to the wheel pressure ."

[Hot Item] End Truck End Carriage for Overhead Cranes

b'End Carriage, End Truck, Wheel Block manufacturer / supplier in China, offering End Truck End Carriage for Overhead Cranes, Electromagnetic Bridge Crane with Carrier Beam in Vertical, Single Girder 10 Ton Overhead Crane for Factory and so on.'

Single Girder Gantry Crane - Gantry Cranes Manufacturer ...

b'The single girder crane mainly consists of gantry frame, hoist trolley, crane travelling mechanism and electrical device. The crane gantry frame is a box-shaped metal structure composed of the main beam, end beam, supporting legs, end carriages, walkway and railings.'

Single Girder Bridge Crane - European Standard Overhead Cranes

b'Bridge \xe2\x80\x93 the beam construction adopts Q345B steel plate that takes a pretreatment of shot blasting. The main beam and end beam are connected by high tensile bolts. Hoisting mechanism \xe2\x80\x93 the modular design provides convenient installation and maintenance. Running mechanism \xe2\x80\x93 three-in-one motor is employed and the protection grade is IP55.'

END-CARRIAGES FOR BRIDGE CRANES DGT WHEEL GROUPS …

b'bearing beam girder Idle drive unit comprising \xe2\x80\x9cDGT\xe2\x80\x9d wheel group Joining cross plates between the beam and bridge crane girder END-CARRIAGE FOR SINGLE GIRDER BRIDGE CRANE \xe2\x80\x9cDGT\xe2\x80\x9d idle wheel group Drive wheels \xc3\x98 125, \xc3\x98 160, \xc3\x98 200, \xc3\x98 250 and \xc3\x98 315 are carbon steel moulded. Sliding wheels \xc3\x98 400 and \xc3\x98 400 R are in spheroidal cast iron.'